Not saved. Use Save Draft to download a copy to your phone or computer.
Marine Facility / Boatyard Field Inspection Worksheet
Field worksheet for waterfront operations, vessel storage, haul-out equipment, marine repair, pollution controls and storm preparedness.
General / Waterfront / Building
Underwriting Focus — Waterfront and public access
Identify whether public or customers access docks, piers, ramps and boats. Watch for uneven decking, missing rails, loose shore power equipment, damaged utilities and unprotected water-edge hazards.
Customer Vessels / Storage / Values
Underwriting Focus — Custody and aggregation
Ask for maximum overnight customer hull exposure and aggregate values, not average counts alone. Document rack tiers, support/chocking, fuel left aboard and the ownership/custody of customer craft.
Haul-Out / Launching / Repairs
Underwriting Focus — Lifting and repair exposure
Vessel handling is a high-severity exposure. Record equipment rated load, operator oversight, sling checks and customer exclusion zones; note hazardous finishing and hot work without certifying lifting equipment.
Fuel / Pollution / Storm / Security
Underwriting Focus — Hurricane and pollution
Clarify who must secure or move each customer boat ahead of storms. Ask about plans, haul-out priority, tie-down equipment and notices. Observe fuel emergency controls and runoff containment; photograph them when present.
Photos to Obtain
Required: readable service tags (if applicable), complete condition/context photos for each recommendation. Never photograph identifying clients without permission.
Narrative Insert
The insured operates a ____ marine facility / boatyard located at ____ with approximately ____ acres, ____ buildings and ____ square feet. Waterfront exposures include ____ wet slips, docks, seawalls, ramps and shore-power service. The site is owned / leased, and building condition/updates are ____.
Vessel storage consists of ____ wet and ____ dry / rack spaces, with maximum ____ customer boats on site. Average / maximum hull values and aggregate exposure are ____. Haul-out operations use ____ equipment rated ____; maximum vessel handled is ____ with blocking / lifting controls ____. Repair and subcontractor operations include ____.
Fuel handling, emergency cutoff, flammable storage, pollution controls, fire protection and security are ____. Storm preparedness and responsibility for securing customer vessels are ____. Prior incidents, waterfront hazards and other observed conditions are ____.